Magnetic Signs & Fridge Magnets
Digitally printed removable magnetic signs and fridge magnets. Strong, vehicle grade magnetic attraction that you can remove as often as you like.
Our Magnetic Signs & Fridge Magnets are supplied individually, not on a sheet or a roll.
Magnetic Signs (also referred to as Magnetic Stickers, Magnet Stickers or Magnetic Vehicle Signs) are a fantastic temporary signage solution usually used on commercial vehicles. Magnetic signs only "stick" to ferrous metals (metals that contain iron) such as steel. Whilst most vehicles have steel body panels, some more specialist vehicles are made from carbon fibre or fibreglass and will not be compatible.
Fridge Magnets (also referred to as Refrigerator Magnets) are a great promotional tool for companies, as well as a fun way to display any image or photograph.
Need magnetic signs or fridge magnets with a domed resin coating?
See our domed fridge magnets.
All of our magnetic signs and fridge magnets have the following benefits:
- Full colour, high resolution digital printing
- Strong, vehicle grade magnetic attraction
- 0.85mm thick magnetic vinyl
- Water resistant
- No setup or design fees
Specifications:
Minimum size: 5 x 5mm
Maximum size: 1700 x 1100mm
Radius corners: Optional
Please note: Due to the thickness of the material, rounded corners with a radius smaller than 2mm are not recommended. We recommend using either square corners or rounded corners with a radius of 2mm or larger.
Care Information
Tips for the correct use of magnetic signs and fridge magnets
Handling- The surfaces of both the metal and the magnetic signs must be dry and free of dust.
- It is important that magnetic signs are removed regularly, ideally every two or three days, cleaned, dried and re-positioned onto the metal surface.
- Hold the magnetic sign above the appropriate surface and let go (place carefully); do not slide (prevents scratches). Avoid placing the sign on contoured surfaces. All edges must be in contact with the metal surface.
- Do not apply over decorative mouldings or sharp contoured folds.
- Avoid using the sign on newly painted surfaces, as solvents in the paint can cause the sign to "stick" with possible damage occurring.
- Never apply the magnetic sign to a newly sprayed, painted or polished surface; let the paintwork harden properly first. Clean with a mild detergent only; never use aggressive cleaning agents.
- Do not forget the target surface; a layer of dirt considerably reduces the magnetic adhesive power. Make sure all surfaces are always clean.
Storage
- The magnetic sign must be stored against a flat metal cabinet or wall (never against a heater or a contoured surface), to avoid the sign gathering airborne ferrous dust.
- Do not leave it loose in a vehicle; the material may become deformed.
- Do not roll up tightly, always very loosely with the magnetic side facing inwards (printed side facing outwards).
General
- In summer temperatures where there is continuous use of the magnetic sign on a vehicle over many days, under certain conditions they may become stuck to paintwork. To avoid this risk, the magnetic signs should be removed when not being used or at night. During the day take off the magnetic plates at least once and re-attach them.
- If the signs are attached to surfaces of vehicles which have obviously been filled or sprayed several times, this will considerably reduce the magnetic adhesive power.
- The plastic film is sensitive to pressure; handle with great care.
- Cracks and tears can occur only as a result of careless handling.
- We will not acknowledge claims for damages or consequential loss resulting from non-compliance with the above points.
Technical Information
To view the technical datasheet for this product, please visit our technical datasheets page.
Printing
We digitally print using a high resolution 4 colour (CMYK) process to
print all logos, text and background colours onto the magnetic substrate.
Pantone® Colours
If Pantone® colours are used in your design we will use the CMYK Pantone® matching system to print your magnetic signs using CMYK inks. Please note: There are many Pantone® colours that cannot be accurately matched using CMYK colours. If you use a Pantone® colour that cannot be matched it will be converted to the closest CMYK colour available.
Please Note
All email orders will be given a PDF proof before production. Orders placed on the website will be approved as part of the ordering process.
Product FAQs
- How are the magnetic signs and fridge magnets supplied?
Our magnetic signs and fridge magnets are supplied individually, not on a sheet or a roll.
- Do you offer metallic background options?
Our Magnetic Signs & Fridge Magnets are printed on a matt white magnetic vinyl. Unfortunately, metallic backgrounds are not available for this product.
- What is the minimum and maximum size for a magnetic sign or fridge magnet?
Minimum size: 5 x 5mm
Maximum size: 1700 x 1100mm
Radius corners: Optional (square corners or 2mm+ radius corners recommended)- What shapes can I choose from?
Our magnetic signs and fridge magnets are available in almost any shape you can think of. On our website you can choose from: Rectangle, Square, Circle, Diamond and Oval. Once you have chosen your shape you will have full control of the width, height and corner radius (if applicable) to tailor it to your requirements.
If you would like to specify a custom shape or have the magnetic sign contour-cut around the edge of your design / logo, you have two options:
1) Customers with print-ready files made to the specifications on our artwork page can choose "Custom" as the shape when ordering and upload the file(s) online. You can then add the product to your shopping cart and checkout online.
2) Please email us, attach your logo/design and explain your requirements. Our graphic designers will be happy to put together a design for you to approve.